Following these installation tips will help ensure that your 22mm Calacatta Marble Effect Squared Worktop is installed correctly and looks great for years to come.
Prepare the Surface:
Ensure that the surface where you'll install the worktop is clean, dry, and level. Any unevenness in the surface can affect the fit and stability of the worktop.
Measure Twice, Cut Once:
Before cutting the worktop to size, double-check your measurements to ensure accuracy. It's always better to measure twice and cut once to avoid any mistakes.
Cutting the Worktop:
Use a fine-toothed saw or a circular saw with a carbide-tipped blade to cut the worktop to the desired dimensions. Make sure to wear appropriate safety gear, such as goggles and gloves, when cutting the worktop.
Applying Adhesive:
Apply a suitable adhesive to the underside of the worktop before placing it on the surface. Follow the manufacturer's instructions for the adhesive application process.
Securing the Worktop:
Once the worktop is in position, use clamps or heavy objects to hold it in place while the adhesive dries. Make sure to apply even pressure across the surface to ensure a secure bond.
Sealing the Joints:
If there are any joints in the worktop, use a suitable sealant to seal them properly. This will prevent moisture from seeping into the joints and causing damage over time.
Final Touches:
Once the worktop is installed, clean any excess adhesive or sealant from the surface using a suitable solvent. Allow the worktop to dry completely before using it.
Regular Maintenance:
To keep the worktop looking its best, clean it regularly with a mild detergent and warm water. Avoid using abrasive cleaners or scouring pads, as they can damage the surface.
Care and Maintenance
To clean, just use a wet cloth with a gentle soap or mild cleaner mixed in warm water. Don't use harsh powders or creams. If you spill something, clean it up right away. After cleaning, gently polish with a soft cloth. Also, wipe away any spilled liquids near joints or cut-outs. When adding the edging, make sure it's aligned with the top of the worktop and hangs over at the bottom. Trim any excess edging so it's not visible.
